Sig-sauer SSG 3000 User Manual download pdf (Page 45)

www.sigsauer.com

7.2 Installing the cheekrest

1. The cheekpiece has two similar openings for the releases.

The opening with the v-notch aimed downward identifies the

right side of the cheekpiece.

2. Place the cheekpiece on top of its recess in the stock,

and force it downward, one side at a time, into its highest

adjustment position. Ensure that the openings for the releases

are aligned with the slot in the stock.

3. Insert the releases into the opposite openings in the

cheekpiece so they engage and lock.

7.3 Stock adjustment options

7.3.1 Adjusting cheekpiece height

1. With a pinching grasp, depress both releases at the same time.

2. Raise or lower the cheekrest to the desired height.

3. Release the grasp on the releases while settling the

cheekrest into the nearest adjustment position.

Figure 13

Figure 14

14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 45 3/27/14 11:17 AM

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 71 72

No comments

Sig-sauer SSG 3000 User Manual Page 45