Sig-sauer SSG 3000 User Manual download pdf (Page 61)

www.sigsauer.com

Malfunction Cause Correction

No round chambered Magazine not properly inserted,

deformed or dirty

Insert magazine all the way until it

engages (see section 5.7.2)

Rifle requires service Return to SIG SAUER.

Bolt cannot be inserted into the

action

Mainspring is decocked Cock the bolt (see section 5.6.1)

Rifle requires service Return to SIG SAUER.

Rifle cannot be locked Rifle is decocked Cock the Rifle (see section 5.6.1)

Rifle requires service Return to SIG SAUER.

Procedure:

1. Remove magazine and unload the Rifle (see section 5.7.1).

2. Open the bolt.

– The round or cartridge case is pulled out of the barrel chamber and ejected.

3. Check that no bullet, round, cartridge case or foreign matter is in the barrel chamber or barrel. If a projectile is lodged

in the bore, strip the Rifle (see section 8) and have the blockage removed with a suitable tool by a qualified gunsmith.

4. Remove round, cartridge case or foreign bodies. Clean, lubricate and assemble the Rifle (see sections 12 and 9).

5. Have the Rifle inspected by an armorer or gunsmith.

14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 61 3/27/14 11:17 AM

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 71 72

No comments

Sig-sauer SSG 3000 User Manual Page 61