Sig-sauer SIG522 Sight Kit Installation User Manual download pdf

SIG522 SIGHT KIT INSTALLATION INSTRUCTIONS

This instruction sheet is designed to assist you in the installation of the SIG522 Sight Kit. Please read these

instructions and familiarize yourself with the parts and tools required to perform the required steps. Refer to your

owner’s manual as you carry out the procedure. If you have any doubts about your ability to perform this task

you should return the rifle to SIG SAUER for installation or seek the help of a qualified gunsmith. Refer to page 48

of your owner’s manual for information in regards to returning the rifle to SIG SAUER Inc.

DO NOT ATTEMPT TO INSTALL THE SIGHT KIT ON A LOADED RIFLE.

To verify the rifle is not loaded, with the muzzle pointed in a safe direction (1) ensure the safety lever is in the

safe position; (2) remove the magazine; (3) pull the charging handle to the rear and lock the bolt open using the

bolt stop lever; (4) visually and physically verify the chamber is empty; (5) allow the bolt to close on the empty

chamber. See section (5.0) of the SIG522 owner’s manual for additional safety information.

Your Kit Includes:

1 Front Hooded Sight

1 Sight Screw Pin

1 Sight Screw

1 Sight Nut

1 Rear Sight Assembly

Required Tools:

Hammer

1/16” and 3/32” Roll Pin Punches

4mm Hex Wrench

3mm Hex Wrench

Gun Oil

Installation of the Front Sight assembly.

1. Drive out the dovetail plug from the gas block (if present).

2. Apply a light coat of lubricant to the dovetail of the hooded front sight

and with a non-marring hammer start tapping the sight into the dovetail

of the gas block from the left side of the gas block.

Note: The right side of the sight dovetail has lead in chamfers to aid

in starting the sight into the dovetail on the gas block!

3. Make sure the sight is straight and not angled as you start it into the

dovetail slot.

4. Use a punch with a diameter large enough to cover the windage screw

hole in the front sight and drive it in until it is flush with the left side of

the gas block.

Front Hooded Sight

Rear Sight Assembly

Lightly oil

Install from

left to right

Large

Punch

1 2

P/N 1520161 2

Summary of Contents

Page 1

SIG522 SIGHT KIT INSTALLATION INSTRUCTIONSThis instruction sheet is designed to assist you in the installation of the SIG522 Sight Kit. Please read th

Page 2 - P/N 1520161

18 Industrial Drive, Exeter, NH 03833 • (603) 772-2302 • www.sigsauer.comP/N 15201615. Apply a small amount of lubricant to the threads of the Sight

Comments to this Manuals

No comments

Sig-sauer SIG522 Sight Kit Installation User Manual

Browse online or download User Manual for Sports and recreation Sig-sauer SIG522 Sight Kit Installation. SIG SAUER SIG522 Sight Kit Installation User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sports and recreation Sig-sauer SIG522 Sight Kit Installation