Sig-sauer MOSQUITO User Manual

WARNING!Please read and understand this owner’s manual before taking your new pistol out of the box. It is vital to your safety and to the safety of

Handling9 US 06.01Information:The .22 LR ammunition spectrum ranges from very light loads for single loader guns to sport load, utility load and on t

Handling10US06.016.4 Loading the pistol (ready for firing) Procedure:1. Point pistol in a safe direction.2. Insert full magazine and ensure that it i

Handling11 US 06.016.5 FiringProcedure:1. Aim pistol at a safe target.2. Place finger on trigger and squeeze the trigger (activates firing).3. Keep t

Handling12US06.016.6 Reloading during firingThe slide is held in the open position.Procedure:1. Remove the empty magazine.2. Insert full magazine and

Handling13 US 06.016.8 Unloading the pistol; magazine empty, slide openProcedure:1. Keep the pistol muzzle pointed in a safe direction.2. Press magaz

Conversion14US06.017 Conversion7.1 Conversion to Standard versionProcedure:1. Remove the front sight 5 and insert the cap 78 into the notch of the sl

Conversion15 US 06.017.2 Conversion to Standard version Procedure:1. Disassemble the pistol (see chapter 9.1).2. Exchange the barrel of the Standard

Sight16US06.016. Place the screw 58 in the frame and tighten it.7. Use screw 66 to fix the takedown lever 25 with the frame.8 Sight adjustment8.1 Sig

Maintenance17 US 06.019 Pistol maintenance9.1 Field stripping the pistolProcedure:1. Unload pistol (see sections 6.7 and 6.8).2. Remove the threaded

Maintenance18US06.018. Remove slide assembly (slide, recoil spring guide and recoil spring) from the barrel muzzle.This level of stripping is suffici

1 US 06.01 Table of contents1 General instructions 21.1 Congratulations 21.2 Firearms safety is your responsibility 22 Safety regulations 32.1 Safety

Maintenance19 US 06.019.3 Pistol assemblyProcedure:1. Inspect the pistol interior and remove any foreign matter.2. Slide recoil spring 3 onto the spr

Maintenance20US06.019.4 Functional checkNote:The check of all functions must be made on the assembled pistol:• to determine any causes of malfunction

Maintenance Servicing21 US 06.019.5 Care of the pistol10 Service and repairs10.1 Fault detection, fault removal Faults can be prevented with the prope

Servicing22US06.01Part/fault Possible cause of fault/defect Possible fault/defect removalAmmunition feeding:Failure to feed.Failure to chamber.Magazi

Servicing23 US 06.0110.2 Safekeeping and storage of pistol10.3 Shipping the pistolNote:• Familiarize yourself with all laws and regulations governing

Scope of supply Accessories24US06.0111 Scope of supply11.1 Standard version1 Pistol1 Magazine1 Gun case1 Safety & Handling booklet1 Test group car

List of replacement parts25 US 06.01ItemDescription1a Barrel a1b Barrel b1c Barrel c2 Recoil spring guide3a Recoil spring, white (standard)3b Recoi

List of replacement parts26US06.01Fig. 20, Spare parts for MOSQUITO

SIG SAUER, Inc.18 Industrial DriveExeter, NH 03833Phone: 603-772-2302Fax: 603-772-9082www.sigsauer.com

General instructions2US06.011 General instructions1.1 CongratulationsYou are now the owner of one of the world's finest and most superbly engine

Safety regulations3 US 06.012 Safety regulations•Never use the pistol under the influence of drugs or alcohol, while ill or suffering other such diff

Safety regulations4US06.012.1 Safety indicationsIn the individual sections of these instructions, the following safety indications alert you to risks

Product description5 US 06.01eilFig. 1, Standard version544662918435115 2014016Fig. 2, Sport version77 78Fig. 3, Silencer version81

Product description6US06.013 Product description3.1 Main parts3.2 Technical dataSubject to change without noticeItem Description Item Description1 Ba

Transport Safety mechanisms7 US 06.014 Transporting the pistol5 Safety mechanisms5.1 Manual safetyEngaging manual safety:1. Push the safety lever (man

Safety mechanisms Handling8US06.012. Remove key leaving end of lock flush or even with bottom of grip (see Fig. 4, right).5.2.1 Magazine safetyRemovin